Lacie EDmini USB

Got problems with your B2 or B3? Share and get helped!
Post Reply
Jockewhbg
Posts: 24
Joined: 08 Oct 2008, 05:09

Lacie EDmini USB

Post by Jockewhbg » 08 Oct 2008, 07:48

I´ve tried to connect my Lacie EDmini external disc via USB. Normally it´s connected via ethernet. I mounted the drive as normal and it appears under storage/extern/disk_0. The disc is password protected and a program must be started to access the drive. I find the program under disk_0/linux/EDmini_LogON but can´t start it. I have quite limited knowledge about Linux but try to learn as I go by. I am logged in as root with putty. How do I run the program from the prompt?

Regards

Jocke

Jockewhbg
Posts: 24
Joined: 08 Oct 2008, 05:09

./ solved first problem but...

Post by Jockewhbg » 08 Oct 2008, 08:05

then?

jocke@bubba:/home/storage/extern/disk_0/linux$ ./edmini_logon
-bash: ./edmini_logon: cannot execute binary file

Any ideas anyone? Not compatible? I would really appreciate some comments.

Regards

Jocke

carl
Posts: 474
Joined: 07 May 2008, 04:41

Re: ./ solved first problem but...

Post by carl » 08 Oct 2008, 09:02

Jockewhbg wrote:then?

jocke@bubba:/home/storage/extern/disk_0/linux$ ./edmini_logon
-bash: ./edmini_logon: cannot execute binary file

Any ideas anyone? Not compatible? I would really appreciate some comments.

Regards

Jocke
It could be that it's an x86 executable; The BubbaTwo is running on an powerpc processor.

/Carl
/Carl Fürstenberg, Excito Software Developer
http://www.excito.com
support@excito.com

Post Reply