reinstall te software on bubba

Got problems with Bubba? Then this forum is for you.
Locked
zig
Posts: 2
Joined: 07 Jun 2008, 03:17

reinstall te software on bubba

Post by zig » 07 Jun 2008, 03:30

I had no acces to bubba anymore with admin.
Since there was no data on bubba I tried to reinstall the software.
I downloaded the 2 files bubba.img and bubba.img.md5. I put them on a USB stick. I shut down bubba with the power switch.
I put in the USB-stick into bubba pressed the power switch and put power on to bubba and released the switch after the led starts flashing.
Now 10 hours later the led is still flashing. Can someone advise me.

Zig

nb000
Posts: 20
Joined: 29 May 2008, 14:40

Post by nb000 » 07 Jun 2008, 09:14

I have 2 ideas, what could be wrong:

1. the pendrive must have a FAT file system
2. you must put the bubba.img file in the root dir of the drive

If both requirements are met,
then I have one clue: it may be,
that bubba does not recognize your pendrive.

zig
Posts: 2
Joined: 07 Jun 2008, 03:17

Post by zig » 07 Jun 2008, 11:01

I changed the pendrive and now it works.

Thanks
nb000 wrote:
that bubba does not recognize your pendrive.

Locked